/Enterprise Risk Management
Environmental Health and Safety

SAFETY GUIDES

SAFETY GUIDE :

SOLDERING SAFETY

 

This document applies to hand soldering using a soldering iron or soldering gun, or reflow soldering using solder paste in ovens or hotplates. For hot work, please refer to “Hot work permit program”.

 

Soldering Hazards

  • Heat & Electrical: The soldering iron is very hot and can cause burns. It could cause fire if placed on flammable or combustible materials. Touching a hot iron to power cords can melt through the insulation and cause electric shock.   
  • Fluxes: Soldering may involve the use of flux paste or liquid, or the solder itself may have a rosin core. Inhalation of flux fumes may cause irritation and damage to mucous membranes and the respiratory system. Depending on the chemical composition, some flux can even release toxic emissions (e.g. formaldehyde etc.) when heated.   
  • Lead and other metals: Lead is a known neurotoxin and can pose significant chronic health effects, such as reproductive problems, digestive problems, and memory and concentration problems. Hand contact or surfaces contaminated with lead solder pose an ingestion hazards. Lead oxide fumes can be given off during soldering. Soldering can also release other metal hazardous fumes (e.g. cadmium, zinc, arsenic, and chromium).  

 

General Safe Practices 

  • Do not eat or drink in soldering areas. 
  • Always wash hands with soap and water after soldering. 
  • Follow manufacturer’s instructions for safe use of soldering unit; consult Safety Data Sheets (SDSs) for the specific materials you are using. 
  • Inspect soldering equipment for damage before and after each use. Immediately report to your supervisor if damage is found. 
  • Soldering iron/gun safety
    • Never touch the element or tip of the soldering iron/gun. 
    • Always return the soldering iron to its stand when not in use. Never lay it directly on your workbench. 
    • Keep the cleaning sponge wet during use. 
    • Turn off or unplug the soldering iron/gun when it is not in use. 
  • Use lead-free solder whenever possible.  

 

Environmental Health & Safety – Division of Enterprise Risk Management

We Care About Safety… People - Science - Education - Medicine - Environment