Skip Navigation
Search

Air Track - Direct Measurement Of Acceleration

Purpose

To measure acceleration using two different procedures.

Equipment

Air track, gliders, two photocell gate timers, small accelerating masses with audiotape frictionless cord, as photographed.◙

Setup Time

5 min.

Images

c2-02

Description

All gliders are equipped with a 5 cm tab which interrupts the light beam when passing through the photocell gate. The timing system can be set to measure the time a tab takes to move through the gate or the time taken for the glider to move from gate A to gate B (not B to A). The timer can be set at full scale ranges from 99.9 ms through 999 seconds for a range of applications. One timer is set so that it records the time for a glider to move from A to B. The second timer is set to measure the time the tab requires to move through gate A, and then after resetting, the time required for the ta

References

(PIRA 1C20.30) An instruction sheet for the photocell gate timer is available in the Demonstration Reference File.H70