Skip Navigation
Search
Materials Science and Chemical Engineering
Center for Thermal Spray Research
HomeResearch PublicationsMechanical and Thermal Properties

Mechanical and Thermal Properties

Journals

  1. Nature inspired, multifunctional, damage tolerant thermal spray coatings, G.M.Smith, M.Resnick, K.Flynn, G.Dwivedi and S.Sampath, Surface and Coatings Technology, 297 (2016) 43-50.
  2. Andrew Vackel, Toshio Nakamura, Sanjay Sampath, Mechanical Behavior of Spray-Coated Metallic Laminates (2016), Journal of Thermal Spray Technology, Volume 25, Issue 5, pp 1009–1019.
  3. Dwivedi, G., Flynn, K., Resnick, M., Sampath, S. and Gouldstone, A. Bioinspired Hybrid Materials from Spray-Formed Ceramic Templates (2015), Adv. Mater., 27: 3073–3078.
  4. Andrew Vackel,Gopal Dwivedi, Sanjay Sampath, JOM, Structurally Integrated, Damage-Tolerant, Thermal Spray Coatings (2015) Volume 67, Issue 7, pp 1540-1553.
  5. Arash Ghabchi, Sanjay Sampath, Kenneth Holmberg, Tommi Varis, Damage mechanisms and cracking behavior of thermal sprayed WC–CoCr coating under scratch testing (2014), Wear, Volume 313, Issues 1–2, Pages 97–105,
  6. Dwivedi, G., Viswanathan, V., Sampath, S., Shyam, A., & Lara‐Curzio, E. Fracture Toughness of Plasma‐Sprayed Thermal Barrier Ceramics: Influence of Processing, Microstructure, and Thermal Aging (2014), Journal of the American Ceramic Society, 97(9), 2736-2744.
  7. Bolelli, G., Cannillo, V., Lusvarghi, L., Rosa, R., Valarezo, A., Choi, W. B & Sampath, S. Functionally graded WC–Co/NiAl HVOF coatings for damage tolerance, wear and corrosion protection (2012), Surface and Coatings Technology, 206(8), 2585-2601.
  8. A.Valarezo, G.Bolelli, W.B.Choi, S.Sampath, V.Cannillo, L.Lusvarghi, R.Rosa, Damage tolerant functionally graded WC-Co/Stainless steel HVOF coatings, Surface and Coatings Technology, 205(7) (2010) 2197-2208.
  9. Y.Liu, T.Nakamura, A.Valarezo, G.Dwivedi and S.Sampath, Anelastic behavior of plasma sprayed zirconia coatings, J.American Ceramic Society, (2008) in press.
  10. W.B.Choi, L.Prchlik, S.Sampath and A.Gouldstone, Indentation of metallic and cermet thermal spray coatings. J.Thermal Spray Tech. 2008, in press
  11. V.Cannillo, F.Pierli, S.Sampath and C.Siligardi, Thermal and physical characterization of apatite,/wollastonite bioactive glass ceramics, J.European Ceramics Society, 2008, in press
  12. W.Chi, S.Sampath and H.Wang, Microstructure-thermal conductivity relationships in plasma sprayed yttria stabilized zirconia, J. American Ceramic Society, Vol.91 (8) (2008) 2636-2645.
  13. Y.Liu, T.Nakamura, V.Srinivasan, A.Vaidya, A.Gouldstone and S.Sampath, “Nonlinear elastic properties of plasma sprayed zirconia coatings and associated relationships to processing conditions”, Acta Materialia, 2007,55 (2007) 4667-4678..
  14. L. Prchlik and S.Sampath, “Effect of microstructure of thermally sprayed coatings on friction and wear response under lubricated and dry sliding conditions Wear 262 (2007)) 11-23.
  15. Y.Tan, J.P.Longtin, S.Sampath, ““Modeling Thermal Conductivity of Thermal Spray Coatings: Comparing Predictions to Experiments,” Journal of Thermal Spray Technology, 15(4) (2006) 545-552.
  16. W.Chi, S.Sampath and H.Wang, “Ambient and high-temperature thermal conductivity of thermal spray coatings”, Journal of Thermal Spray Technology, 15(4) (2006) 773-778.
  17. W.Chi, S.Sampath and H.Wang, “Comparison of the thermal transport property measurements of thermally sprayed coatings by the laser and xenon flash techniques”, J.Thermal Spray Technology, 16(3) (2007) 444-448.
  18. V.Luzin, A.Valarezo and S.Sampath, ‘Through-thickness residual stress measurements in metal and ceramic spray coatings by neutron diffraction’, Materials Science Forum Vols 571-572 (2008) 315-320.
  19. N.Challocoop, L.Li and A.Gouldstone, “Errors in resolved modulus during nano-indentation of hard films on soft substrates: A computational study” Materials Science and Engineering A 423(2006)36-40.
  20. L. Prchlik, “Input error sensitivity of hardness and elastic modulus evaluated from indentation load-displacement records by Oliver and Pharr method”, J. Materials Sci., 39 (2004), pp. 1185-1193.
  21. Y. Gu, T. Nakamura, L. Prchlik, S. Sampath and J. Wallace, “Micro-indentation and inverse analysis to characterize elastic-plastic graded materials”, Mater. Sci. & Eng. A, 345 (2003), pp. 223-233.
  22. L. Prchlik, J. Pisacka and S. Sampath, “Deformation and strain distribution in plasma sprayed nickel-aluminum coating loaded by a spherical indenter”, Mater. Sci. & Eng. A, 360 (2003), pp. 264-274.
  23. Z. Wang, A. Kulkarni, S. Deshpande, T. Nakamura and H. Herman, “Effects of pores and interfaces on effective properties of plasma sprayed zirconia coatings”, Acta Materialia, 51 (2003), pp. 5319-5334.
  24. Z. Wang and T. Nakamura, “Simulations of Crack Propagation in Elastic-Plastic Graded Materials”, Mechanics of Materials, 36 (2003), pp. 601-622.
  25. A. H. Dent, S. DePalo and S. Sampath, “Examination of the wear properties of HVOF sprayed nanostructured and conventional WC-Co cermets with different binder phase contents”, J. Thermal Spray Technology, 11 (2002), pp. 551-558
  26. J. Alcala, F. Gaudette, S. Suresh and S. Sampath, “Instrumented spherical micro-indentation of plasma-sprayed coatings”, Mater. Sci. & Eng. A, 316 (2001), pp. 1-10.
  27. M. Dao, N. Chollacoop, K. J. Van Vliet, T. A. Venkatesh and S. Suresh, “Computational modeling of the forward and reverse problems in instrumented sharp indentation”, Acta Materialia, 49 (2001), pp. 3899-3918.
  28. R. S. Lima, A. Kucuk, and C. C. Berndt, “Evaluation of Microhardness and Elastic Modulus of Thermally Sprayed Nanostructured Zirconia Coatings”, Surf. & Coat. Tech., 135 (2001), pp. 166-172.
  29. T. Nakamura and Z. Wang, “Computational simulations of crack propagation in porous materials”, Journal of Applied Mechanics-Transactions of the ASME, 68 (2001), pp. 242-251.
  30. L. Prchlik, J. Gutleber and S. Sampath, “Deposition and properties of high-velocity-oxygen-fuel and plasma-sprayed Mo-Mo2C composite coatings”, J. Thermal Spray Technology, 10 (2001), pp. 643-655
  31. L. Prchlik, S. Sampath, J. Gutleber, G. Bancke and A. W. Ruff, “Friction and wear properties of WC-Co and Mo-Mo2C based functionally graded materials”, Wear, 249 (2001), pp. 1103-1115.
  32. A.Kucuk, C.C.Berndt, U.Senturk, R.S.Lima, and C.R.C.Lima, “Influence of Plasma Spray Parameters on the Mechanical Properties of Yttria Stabilized Zirconia Coatings I: Four Point Bend Test”, Mater. Sci. & Eng. A, 284 (2000), pp. 29-40.
  33. A.Kucuk, C.C.Berndt, U.Senturk, R.S.Lima, and C.R.C.Lima, “Influence of Plasma Spray Parameters on the Mechanical Properties of Yttria Stabilized Zirconia Coatings II: Acoustic Emission Response”, Mater. Sci. & Eng. A, 284 (2000), pp. 41-50.
  34. T. Nakamura, G. Qian and C. C. Berndt, “Effects of pores on mechanical properties of plasma-sprayed ceramic coatings”, J American Ceramic Soc., 83 (2000), pp. 578-584.
  35. T. Nakamura, T. Wang and S. Sampath, “Determination of properties of graded materials by inverse analysis and instrumented indentation”, Acta Materialia, 48 (2000), pp. 4293-4306.
  36. U.Senturk, R.S.Lima, C.R.C.Lima, C.C.Berndt, “Deformation of Plasma Sprayed Thermal Barrier Coatings”. J. Eng. for Gas Turbines and Power. 122 (2000), pp. 387-392.
  37. A.E.Giannakopoulos, and S.Suresh, “Determination of Elastoplastic Properties of Materials by Instrumented Sharp Indentation”, Scripta Materialia, 40(1999), pp. 1191.
  38. S.Suresh, M.Olsson, A.E.Giannakopoulos, N.P.Padture and J.Jitcharoen, “Engineering the Resistance to Sliding-Contact Damage Through Controlled Gradients in Elastic Properties at Contact Surfaces”, Acta Materialia, 47(1999), pp. 3915.
  39. S.Usmani and S.Sampath, “Time-Dependent Friction Response of Plasma Sprayed Molybdenum”, Wear , 225-229(1999)1131.
  40. J.Jitcharoen, N.P.Padture, A.E.Giannakopoulos, and S.Suresh, “Hertzian-Crack Suppression In Ceramics With Elastic-Modulus-Graded Surface”, J. American Ceramic Soc., 81(1998) 2301.
  41. A.J.Slifka, B.J.Filla, J.M.Phelps, G.Bancke and C.C.Berndt, “Thermal Conductivity of a Zirconia Thermal Barrier Coating”, J. Thermal Spray Tech., 7 (1998), pp. 43.
  42. C.K.Lin, S.H.Leigh and C.C.Berndt, “Acoustic Emission Responses of Plasma-Sprayed Alumina-3% Titania Deposits”, Thin Solid Films 310 (1997), pp. 108.
  43. S.Usmani and S.Sampath, ‘Erosion studies on Duplex and Graded Ceramic Coatings’, JOM 48(11) (1996) 51-54.

Proceedings

  1. J.M.Guilemany, N.Cinca, J.Fernandez and S.Sampath, Erosion, Abrasive and Friction Wear Behavior of Iron Aluminide Coatings Sprayed by HVOF, ITSC 2008, Maastricht, Netherlands, CD proceedings
  2. Y.Liu, T.Nakamura, V.Srinivasan, A.Gouldstone and S.Sampath, “Mechanisms underlying anelastic properties of thermal spray coating, Proceedings of International Thermal Spray Conference, China, May 2007.
  3. W.Chi, S.Sampath and H.Wang, “Application of Xenon flash technique for investigation of stability and reliability of plasma sprayed yttria-stabilized zirconia coatings, Proceedings of International Thermal Spray Conference, Beijing, China, May 2007.
  4. A.Valarezo, J.Japson, A.Gouldstone and S.Sampath, Residual stress development in metallic coatings by HVOF spraying, Proceedings of International Thermal Spray Conference, China, May 2007.
  5. Y.Liu, T.Nakamura, V.Srinivasan, A.Gouldstone and S.Sampath, Optimizing nonlinear properties of thermal sprayed coatings through processing parameters, Mat.Res.Soc.Symp.Proc, 2006
  6. Y.Tan, A.Sharma, J.P.Longtin and S.Sampath, Image based modeling for assessing thermal conductivity of thermal spray coatings at ambient and high temperature. IMECE2006-15972, ASME 2006.
  7. M.Qu, Y.Wu, A.Gouldstone, “Simulations of Curvature Evolution Splat-Substrate Systems under Thermal Cycling,” Thermal Spray Conference & Expositions (ITSC) Seattle, Washington, 2006, Electronic Proceedings.
  8. J. H. Kim, A. Gouldstone , N. Chollacoop , "Effects of Coating-Substrate Properties and Adhesion on Indentation Results," Thermal Spray Conference & Expositions (ITSC) Seattle, Washington, 2006, Electronic Proceedings.
  9. W. Choi, S. Sampath, A..Gouldstone, “Inelastic Deformation of Metallic Coatings: Measurement and Analysis”, Thermal Spray Conference & Expositions (ITSC) Seattle, Washington, 2006, Electronic Proceedings.
  10. W.Chi, S. Sampath, H. Wang, “Ambient and High Temperature Thermal Conductivity of Thermal Sprayed Coatings”, Thermal Spray Conference & Expositions (ITSC) Seattle, Washington, 2006, Electronic Proceedings.
  11. T. Nakamura and Y. Gu, “Measurements of elastic-plastic anisotropic properties of thermally sprayed coatings using nano-indenters and inverse analysis technique”, Thermal Spray Solutions: Advances in Technology and application (ITSC 2004), Osaka, Japan, 2004, Electronic copy
  12. T. Nakamura and S. Sampath, “Thermally Sprayed FGM and Determination of its property by Inverse Analysis, FGM 2000”, Ceramic Transations, eds. K. Ichikawa, Kluwer Academic Publishers, 2001, p.86-91.
  13. S.DePalo, M.Mohanty, H.Marc-Charles, M.Dorfman, “Fracture Toughness of HVOF Sprayed WC-Co Coatings”, ITSC 2000, Montreal, Canada, p245-250.
  14. A.Kucuk, C.C.Berndt, U.Senturk, R.S.Lima and C.R.C.Lima, “Deformation Characteristics of Plasma Sprayed Thermal Barrier Coatings”, 24th Annual Cocoa Beach Meeting Proceeding, Cocoa Beach, Florida, January 23-30, 2000. Am. Ceramic Soc., Vol. 21, Part 4, 2000, p. 681-690.
  15. C.R.C.Lima, U.Senturk, R.S.Lima, and C.C.Berndt, “Thermal Conductivity Behavior of Sol-Gel Post Treated Thermal Barrier Coatings”, Thermal Spray – Surface Engineering via Applied Research, Ed. C. C. Berndt, ASM International, Materials Park, OH, USA, 2000, p. 1057-1060.
  16. A.Kucuk, C.C.Berndt, U.Senturk and R.S.Lima, “Characterization of the Mechanical Properties of TBCs via a Taguchi Experimental Design”. ITSC 2000, Montreal, Canada, 2000, p1211-1217.
  17. L. Prchlik, A. Vaidya, S. Sampath and H. Herman, “Damage Tolerant Tribological Coatings Based on Thermal Sprayed FGMs”, Ceramic Transations, Functionally Graded Materials 2000, American Ceramic Society, Estes Park, Colorado, USA, 2000, p.111
  18. J.A. Brogan, C.C. Berndt, A. Claudon and C. Coddet, “Mechanical Properties of Spray-Formed Composite Structures”, Proc. of the 15th ITSC, 2 (1998) 1173.
  19. S.DePalo, S.Usmani, S.Sampath, M.Besser and D.Sordelet, “Friction and Wear Behavior of Thermally Sprayed Al-Cu-Fe Quasicrystalline Coatings”, Thermal Spray: A United Forum for Scientific and Technological Advances, Published by ASM Intl, Ed. C.C.Berndt, September, 1997, p135.
  20. J. Gutleber, S. Sampath and S.Usmani “Processing and Thermal Cycling Effects on the Erosion Behavior of Thermal Barrier Coatings”, Thermal Spray: A United Forum for Scientific and Technological Advances, Published by ASM Intl., Ed. C.C.Berndt, September, 1997, p285.
  21. S.H.Leigh, C.C.Berndt, M.K.Ferber, L.Riester, “Nanoindentation Study of Thermal Spray Deposits”, Thermal Spray: A United Forum for Scientific and Technological Advances, Published by ASM Intl., Ed. C.C.Berndt, September, 1997, p723.