AIDC 100 Archives - Allan Gilligan Collection
Collection 338

Description

Papers, 1975-2000.
34 cubic ft.
Organization: Series arrangement by re-created order; sub-series arranged alphabetically and chronologically.
Documents, photographs, slides, digital media and artifacts from the 34-year career with AT&T, Bell Laboratories and Lucent Technologies.

Processed in March 2003 by F. Jason Torre; container listing by Elissa Daub.

Preface
Introduction
Biographical Note
Scope and Content Note
Series Description
Container Listing
AIDC 100 Archives Resource Center

Preface

The Allan Gilligan Collection is the fifth collection donated by a member of the AIDC 100 for inclusion in the AIDC 100 Archives at Stony Brook. The AIDC 100 Archive and Stony Brook University are indebted to Mr. Gilligan for his foresight in preserving these valuable documents and entrusting them to the University as well as his continued support and encouragement of the AIDC 100 Archive project.

Special thanks are extended to the following individuals for all their support during the planning and processing of this collection: Teddy and George Goldberg, without whose vision this collection would not have found its way to the Archives; Craig Harmon and Tina Barkan, for their concern and assistance in acquiring this collection; Kristen J. Nyitray, Head of Special Collections and University Archives for her continued guidance and assistance. Additional thanks are extended to the following administration members for their support and encouragement: E. Christian Filstrup, Dean and Director of Libraries; Daniel Kinney, Assistant Director of Library for Collections and Technical Services.

Introduction

The Allan Gilligan Collection was donated to the AIDC 100 Archive in July of 2001 and additional material was accessioned later in the early fall of that same year. The collection contains photographs, slides, artifacts, research notes, presentations, committee papers and general subject related publications and documents. The collection is vast and touchs on the many aspects of Mr. Gilligan's life work within the automatic identification and data capture industry (AIDC), and highlights his research and work with Bell Laboratories and Lucent Technologies.

The collection is open to research without restrictions in accordance with general access principles, and under the discretion of the Special Collections Department Staff. All requests to use or reproduce any of Mr.Gilligan's papers or publications should be addressed to the Special Collections Department Staff; copyrights to all remaining items within the collection (not created by Mr. Gilligan) must be obtained from the owner prior to publication, however, items may be reproduced for research purposes.

In citing the collection, please credit it as follows: Allan Gilligan Collection, Special Collections Department, University Libraries, Stony Brook University.

Materials within this collection may be located with the use of the collection's finding aid available in hardcopy and online through the University Library's web page.

Biographical Note

After working for AT&T, Bell Laboratories, Lucent Technologies for 34 years Mr. Gilligan retired in 2001. His early work on the Standards and Materials Engineering department in 1967 involved him in automated information systems. His work in the field of bar code technology began in 1976 with technical development work relating to the deployment of optical scanning technology in Bell System central office plug-in inventory systems. The successful implementation of these systems led to more extensive work on the testing, evaluation and standardization of bar code symbology, bar code labels, verification and scanning devices for use within AT&T. This expertise was brought into the national standards bodies with his active participation and leadership in the American National Standards Institute (ANSI) Materials Handling MH10.8 committee, the Electronic Industries Alliance (EIA) Industrial Bar Code subcommittee and the Telecommunications Industry Forum (TCIF) Bar Code Transaction Label subcommittee. Under his leadership the first national and telecommunication industry standards for bar code shipping and receiving labels and a revolutionary new standard for measuring bar code print quality were issued. These standards have been the benchmarks for current international bar code standards development in both Europe and Japan. In 1986 Mr. Gilligan received the Don Percival Award from AIM USA and SCAN Newsletter for his leadership and innovation in bar code equipment evaluation and standards development. In 1995 Mr. Gilligan received the Engineering Award of Excellence from the Electronic Industries Alliance for his leadership role in developing standards and technology within the electronics industry.

As a result of the AT&T reorganization in 1996, Mr. Gilligan transferred his Global Bar Code Technology group to Lucent Technologies Network Systems and continued to set new industry benchmarks for the development and implementation of customer focused bar code labeling standards based on ISO, ANSI and EIA standards. His group did leading edge equipment and 2D symbology testing as well as standards' development for manufacturing and telecommunications industry deployment. He also led the EIA/CEA Automatic Data Capture committee to issue bar code labeling standards ANSI/EIA 556, 556-A, 556-B and also EIA-624, 624A, 706 and 802 for package labeling, component marking and product labeling. All these standards were ground breaking efforts that required coordination between various industry sectors and inter industry committees before the documents could be approved as standards. Within the American National Standards Institute (ANSI) area, Mr. Gilligan chaired the Materials Handling MH10 and MH10.8 committees that developed cross-industry national standards for bar code print quality, package labeling and two dimensional bar code syntax requirements to enable the encoding of EDI related information on packages. These committees are now in the final stages of developing standards for radio frequency tags for use on returnable containers and cable reels. As chairman of the MH10 committee he also chaired the United States Technical Advisory Group to ISO TC122-Packaging. All of these committees have issued, and continue to develop, bar code, RFID and 2D standards that support the implementation of electronic commerce between trading partners. On the international scene, Mr. Gilligan was convener of ISO TC122 Work Groups 4 and 7 that developed the ISO Shipping Label standard ISO-15394 and the Product Package Label standard ISO 22742.

Mr. Gilligan earned a BSEE degree and MSIE degree from the New Jersey Institute of Technology. He is presently the AIT consultant and adjunct professor at the AIT Center of Excellence at Mississippi Valley State University, Itta Bena, MS.

Scope and Content Note

The Allan Gilligan Collection consists of two sub-groups and 15 series. The listed series are: ANSI, AIAG, EIA, FACTS, IEC/TC 91, ISO/TC 122, CEN, TCIF contained within sub-group I. The Series within sub-group II are: Subject files, Standards and Specfications, Research Notes, Presentations, Electronic Media, Artifacts and Photographs/Slides. Certain series have also been broken down into their component parts which have been formed into sub-series in an effort to assist researchers with their work and understanding of the organizational hierarchy as was interpreted at the time of processing.

The series' original order has been maintained where applicable and re-created in others to assist researchers more easily. Where appropriate 'Series Notes' have been included to assist researchers when examining certain series. Also, items found to fit more appropriately in the AIDC 100 reading room's reference shelf have been removed and cataloged in accordance with library guidelines. In addition, basic preservation guidelines have been followed during the processing of the collection. Items housed in acidic housings have been removed from these housings for preservation reasons and have been placed in acid free folders and containers. Those materials orginally stored in three-ring binders have been removed from those binders and placed in acid-free folders; the original order was maintained. All metal fasteners and PVC plastic housings have been removed and replaced in accordance with accepted archival standards of preservation.

The Allan Gilligan Collection's main sub-group of note is sub-group I which contains the extent of Mr. Gilligan's committee work. The papers contained within this sub-group provide researchers with a clear understanding of the scope and of his work on the committees as well as providing the researcher with a glimpse of the internal workings of, in most cases, committees whose decisions and work affected not only the U.S. community but the international community as well.

Series Description

Subgroup I

Series I: American National Standards Institute (ANSI), 6 linear feet, 1980-2000. This series contains material collected by Mr. Gilligan during his tenure as a member of the committee and represents major work done on MH 10.8.

Series II: Automotive Industry Action Group (AIAG), 5 1/2 linear inches, 1988-1993. This series contains meeting minutes from work done while on the Automatic Identification Project Team Symbology and Shipping Labels Workgroups.

Series III: Electronic Industries Association (EIA), 8 1/2 linear feet, 1975-1999. This series contains related committee papers, standards papers and subject related records from work done as a member of the EIA.

Series IV: Federation of Automated Coding Technologies (FACTS), 8 linear inches, 1985-1992. This series contains work done while on the Standard Label Workgroup and subsequent year's meeting minutes.

Series V: International Electro Technical Commission (IEC/TC 91), 2 1/2 linear inches, 1999. This small series contains drafts and correspondence from work done on the technical committee.

Series VI: International Standards Organization (ISO/TC122), 1 linear foot, 1993-1996. This series consists of drafts, correspondence, documentation and specifications from work done for various ISO technical committees.

Series VII: Committee of European Normalization (CEN), 5 1/2 linear inches, 1991-1996. This series is comprised mostly of briefs from technical committee 225.

Series VIII: Telecommunications Industry Forum (TCIF), 13 linear feet, 1986-2000. This series has been broken down by sub-series. Each sub-series deals with a specific aspect of Mr. Gilligan's overall involvement with the organization and has been re-created based on a subject file arrangement.

Subgroup II

Series I: Subject Files, 4 1/2 linear feet, 1980-2000. The series contains material kept in an alphabetical subject file on various topics referred to or collected throughout the course of business.

Series II: Standards & Specifications, 1 1/2 linear feet, 1980-1999. The series contains industry and corporate standards and specifications for the development and use of bar codes.

Series III: Research Notes, 1 1/2 linear feet, 1975-1995. The series contains primary research notes and papers from Mr. Gilligan's work at AT&T.

Series IV: Presentations, 1 linear foot, 1978-1987. This series contains overheads from various seminars, workshops and presentations conducted by Mr. Gilligan.

Series V: Electronic Media, 3 linear inches, 1993. This serie's main component is a single publication published by Zebra, Inc. which includes a software program. Also included are other software related items.

Series VI: Artifacts, 1 linear inch, 1974-1994. This series contains the Computype, Inc Bar-Code-caluculator, resistors and contrast guide.

Series VII: Photographs/Slides, 5 1/5 linear inches, 1989-1990. The series contains various slides and photographs depicting research projects conducted throughout Mr. Gilligan's career. It should be noted that the majority of the slides are undated.

Container Listing

Subgroup I: Committee Papers

Subgroup I, Series I: American National Standards Institute (ANSI)

Sub-series I: Meetings, Box 1

38th ANSI MH-10 Committee Meeting, April 24, 1986
39th ANSI MH-10 Committee Meeting (f1), September 17, 1987
39th ANSI MH-10 Committee Meeting (f2), September 17, 1987
40th ANSI MH-10 Committee Meeting, June 21, 1988
MH10 Committee Meeting Agenda & Notes, February 16, 1996
MH 10 Committee Meeting Minutes, December 9, 1993
MH 10.8 (BCPQ) Committee Meeting Minutes, March 8, 1988-March 9, 1988
MH 10.8 Committee Meeting Minutes, February 14, 1990
MH 10.8 Committee Meeting Minutes, May 9, 1990

Box 2

MH 10.8 Committee Meeting Minutes (f1), January 7-8, 1992
MH 10.8 Committee Meeting Minutes (f2), January 7-8, 1992
MH 10.8 Committee Meeting Minutes, April 1-2, 1992
MH 10.8 Committee Meeting Minutes, October 20-21, 1992
MH 10.8 Committee Meeting Minutes (f1), April 13-14, 1993
MH 10.8 Committee Meeting Minutes (f2), April 13-14, 1993
MH 10.8 Committee Meeting Minutes, August 10-11, 1994
MH 10.8 Committee Meeting Minutes, October 4-5, 1994
MH 10.8 Committee Meeting Minutes, October 5-6, 1994

Box 3

MH 10.8 Committee Meeting Minutes (f1), December 12-15, 1994
MH 10.8 Committee Meeting Minutes (f2), December 12-15, 1994
MH 10.8 Committee Meeting Minutes, February 1-2 1995
MH 10.8 Committee Meeting Minutes, April 19-20 1995
MH 10.8 Committee Meeting Minutes (f2), April 19-20 1995
MH 10.8 Committee Meeting Minutes (f1), May 31-June 1, 1995
MH 10.8 Committee Meeting Minutes (f2), May 31-June1, 1995
MH 10.8 Committee Meeting Minutes (f1), July 12-13, 1995
MH 10.8 Committee Meeting Minutes (f2), July 12-13, 1995

Box 4

MH 10.8 Committee Meeting Minutes, September 27-29, 1995
MH 10.8 Committee Meeting Minutes, December 12-13, 1995
MH 10.8 Committee Meeting Minutes (f1), January 30-31, 1996
MH 10.8 Committee Meeting Minutes (f2), January 30-31, 1996
MH 10.8 Committee Meeting Minutes (f1), May 1-2, 1996
MH 10.8 Committee Meeting Minutes (f2), May 1-2, 1996
MH 10.8 Committee Meeting Minutes (f1), October 9. 1996
MH 10.8 Committee Meeting Minutes (f2), October 9, 1996

Box 5

MH 10.8 Committee Meeting Minutes, February 24, 1997
MH 10.8 Committee Meeting Minutes, March 18-19, 1998
MH 10.8 Committee Meeting Minutes, September 24-25, 1998
MH 10.8 Committee Meeting Minutes (f1), January 20-21, 1999
MH 10.8 Committee Meeting Minutes (f2), January 20-21, 1999
MH 10.8 Committee Meeting Minutes, April 8-9, 1999
MH 10.8 Committee Meeting Minutes, July 27-28, 1999
MH 10.8 Committee Meeting Minutes, October 12-13, 1999
MH 10.8 Committee Meeting Minutes, January 26-27, 2000

Box 6

MH 10.8 Committee Meeting Minutes, April 26-27, 2000
MH 10.8 Committee Meeting Minutes, July 12-13, 2000
MH 10.8 Committee Meeting Minutes, October 26-27, 2000
MH 10.8 Committee Meeting Minutes 2D, July 14-15, 1993
MH 10.8 Committee Meeting Minutes 2D, August 31-September 1, 1993
MH 10.8 Committee Meeting Minutes 2D SBC, September 27, 1993
MH 10.8 2D Committee Meeting Minutes, November 9-10, 1992
MH 10.8 2D Committee Meeting Minutes, January 12, 1994
MH 10.8 M2D Meeting, March 16-17, 1994

Box 7

MH 10.8 2D Committee Meeting Minutes, May 4, 1994
MH 10.8 2D Committee Meeting Minutes (f1), June 16-17, 1994
MH 10.8 2D Committee Meeting Minutes (f2), June 16-17, 1994
MH 10.8 2D Committee Meeting Minutes (f3), June 16-17, 1994
X3A1.3/MH 10-SBC 8 Meeting, September 24, 1986
X3A1.3 Print Quality WG Meeting, March 18, 1987-August 13, 1987
X3A1.3/MH10.8 Meeting (f1), February 10-11, 1987
X3A1.3/MH10.8 Meeting (f2), February 10-11, 1987

Subgroup I: American National Standards Institute (ANSI)

Sub-series II: Documentation, Box 8

ANSI/ASQC Q9001, 1994
ANSI MH10.8 M Unit Loads & Transport Pack, 1983
ANSI Style Manual, March 1, 1991
Correspondence (X3A1.3-8CPQ), May 25, 1983-February 11, 1988
Correspondence (X3M.3-BC PQ), February 15, 1988- March 1, 1988
Correspondence (BC PQ), July 25, 1988-November 3, 1988
Correspondence (BC PQ), August 18, 1989-December 10, 1990
ANSI MH 10.8M-199X Correspondence, November 24, 1990-March 5, 1993

Box 9

ANSI MH 10.8M-199X Correspondence, January 10, 1991-June 6, 1991
ANSI MH 10.8M-199X Correspondence, July 1991-October 1991
ANSI MH 10.8M-199X Correspondence, March 12, 1992-June 26, 1992
ANSI MH 10.8M-199X Correspondence, July 7, 1992-March 3 1993
ANSI MH 10.8M-199X Correspondence, February 18, 1994-May 25, 1995
Drafts MH10.8/X3A1.3, March 18, 1987
Drafts MH 10.8/X3A1.3, February 17, 1988
Drafts MH 10.8/X3A1.3 (BC PQ), December 21, 1988
ANSI MH2-1996 Draft, N.D.
ANSI MH 10.8M-199 X Drafts, June 1, 1990-November 29, 1990

Box 10

ANSI MH 10.8M 199X Drafts, January 21, 1991-April 24, 1991
ANSI MH 10.8M-199X Drafts, June 13, 1991-December 2, 1991
ANSI MH 10.8M-199X Drafts, May 1, 1992
ANSI MH 10.8M-199X Drafts, February 1, 1996
ANSI MH 10/SC8 Transfer Data, N.D.
Syntax for High Capacity ADC Media Draft, August 21, 1998
ANSI MH 10.8 1M-1998 Draft (f1), November 15, 1998
ANSI MH 10.8.1M-1998 Draft (f2), November 18, 1998
ANSI MH 10.8.2M-199X Draft, July 1, 1994
ANSI MH 10.8.2 Draft, November 15, 1995
ANSI MH 10.9M Fact-199X Draft, April 10, 1993

Box 11

MH 10.8 History (f1), 1980-1981
MH 10.8 History (f2), 1980-1981
AIM Symbology Test, September 25, 1985
Bar Code Print Quality Comments, 1985-1986
Second Bar Code Quality Tests, October 1, 1987-February 16, 1988
Intermec Test, ANSI symbol #1, April 9-June 9, 1987
Intermec Test ANSI symbol #5, May 27, 1987
Intermec Test ANSI symbol #2 & 3, June 1, 1987
Intermec Test ANSI symbol #7& 8, June 8, 1987
Intermec Test ANSI symbol # 4, August 20, 1987

Box 12

ISO/TC204 U.S. Tag N102 Meeting, July 28, 1998
ISO/TC122 (f1), February 16, 1998-December 31 1998
ISO/TC122 (f2), February 23, 1998- August 5, 1998
ISO/TC-122 Meeting, September 4, 1997-March 18, 1999
Monarch Marking Test Code 39, March 23, 1987
X3A1.3 Draft Bar Code Acceptability Standard, March 5-October 15, 1985
X3A Subcommittee ORC, July 1987
X3A1.3 Test Symbol Reflectance Plots, August 11, 1987
X3A1.3 Element Widths, September 25, 1987

Box 13

X3A1.3 Width Comparison Plots, September 25, 1987
X3A1.3 Overlay plots of narrow element widths, September 25, 1987
X3A1.3 Global Algor, September 25, 1987
X3A1.3 Waveform Plots for MRD, November 16, 1987
Proceedings X3A1 subcommittee on OCR, August 1986-September 1989
X3A1.3 Subcommittee on OCR, December 1987

Subgroup 1, Series II: Automotive Industry Action Group (AIAG), Box 14

AIAG Information Exchange Forum August 3, 1989 - August 9, 1989
AIAG Information Exchange Forum November 2, 1989November 6, 1989 Meeting, Log GIEX 1103
AIAG Information Exchange Forum December 7, 1988December 14, 1989 Meeting, Log GIEX 1204
Auto ID Project Team Shipping Label Workgroup March 28, 1990 Meeting Minutes March 29, 1990 Log TAC 10328.23
Auto ID Project Team Shipping Label Workgroup February 28, 1990 Meeting Minutes, March 1, 1991 Log Page TAS 10228.32
Auto ID Project Team Shipping Label Workgroup April 25, 1990 Meeting Minutes, Log Raw TAS 10425.32
Auto ID Project Team Shipping Label Workgroup May 23, 1990 Meeting Minutes, May 24, 1990 Log TAS 10522.32
Auto ID Project Team Shipping Label Workgroup June 27, 1990 Meeting Minutes, July 3, 1990 log page TAS 10621
Auto ID Project Team Symbology Workgroup October 23, 1990 Meeting Minutes, October 31, 1990 Log Page TASY 1020
Auto ID Project Team Shipping Label Workgroup October 24, 1990 Meeting Minutes, October 24, 1990 Log Back TASL 1024
Auto ID Project Team Shipping Label Workgroup November 28, 1990 Meeting Minutes, November 28, 1990 Log TASL 1128
Auto ID Project Team/groups Symbology Workgroup Nov. 28, 1990 Meeting Minutes, November 29, 1990 Log TAST 1128
Auto ID Project Team November 28, 1990 Meeting Minutes, December 11, 1990 Log TAPT113
Auto ID Project Team Radio Frequency Identification Standard (ARF), October 30, 1990 Log Page TAPT 1022
Auto ID Project Team Shipping Label Workgroup January 23, 1991 Meeting Minutes, January 24, 1991 Log TAS L0123
Auto ID Project Team Symbology Workgroup January 22, 1991 Meeting Minutes Jan 24, 1991 Log TASY 1022
Auto ID Project Team January 23, 1991 Meeting Minutes Jan 28, 1991 Log Tap T0116
Auto ID Project Team Shipping Label Workgroup, March 27, 1991 Meeting Minutes March 29, 1991 Log TASL 0322
Auto ID Project Team Symbology Workgroup February 26, 1991 Meeting Minutes March 11, 1991 Log TASY 0226
Auto ID Project Team Symbology Workgroup March 26, 1991 Meeting Minutes March 27, 1991 Log TAST 0326
Auto ID Project Team February 27, 1991 Meeting Minutes, March 1, 1991 Log TAPT 0222
Auto ID Project Team March 27, 1991 Meeting Minutes March 29, 1991 Log TAPT 0320
Auto ID Project Team Shipping Label Workgroup April 25, 1991 Meeting Minutes, April 27, 1991 Log TASL 0415
Auto ID Project Team April 24, 1991 Meeting Minutes April 27, 1991 TAPT 0416
Auto ID Project Team Shipping Label Workgroup May 22, 1991 Meeting Minutes May 22, 1991 Log Page TASLOS 22
Auto ID Project Team Symbology Workgroup May 21, 1998 Minutes, June 18, 1991 Log Page TASY 0524
Auto ID Project Team Shipping Label Workgroup June 26, 1991 Meeting Minutes, June 26, 1991 Log Page TASL 0526
Auto ID Project Team Symbology Workgroup July 23, 1991 Meeting Minutes, July 26, 1991 Log TASY 0723
Auto ID Project Team June 26, 1991 Meeting Minutes June 27, 1991 Log TAPT 0611
Auto ID Shipping Label Workgroup July 21, 1991 Meeting Minutes, August 2, 1991
Auto ID Project Team Shipping Label Workgroup August 28, 1991 Meeting Minutes August 29, 1991 Log TASL0313
Auto ID Project Team August 28, 1991 Meeting Minutes September 9, 1991 Log TAPT 0817
Auto ID Project Team October 23, 1991 Meeting Minutes
Auto ID Project Team Symbology Workgroup October 23, 1991 Meeting Minutes, November 7, 1991 Log TASY 1023
Auto ID Project Team December 4, 1991 Meeting Minutes December 11, 1991 TAPT 1203
Auto ID Project Team Shipping Label Workgroup January 22, 1992 Meeting Minutes January 29, 1992 TASL 0117
Auto ID Project Team Symbology Workgroup January 21 1992 Meeting Minutes, January 27, 1992 TASL 0114
Auto ID Project Team January 22, 1992 Meeting Minutes, February 11, 1992 TAPT 0131
Auto ID Project Team Shipping Label Workgroup March 24-25, 1992 Meeting Minutes March 31, 1992 TASL 0324
Auto ID Project Team Shipping Label Workgroup May 26-27, 1992 Meeting Minutes June 2, 1992 TASL 0526
Auto ID Project Team Symbology Workgroup March 23, 1993 Meeting Minutes March 25, 1993
Auto ID Project Team Symbology Workgroup April 27 1993 Meeting Minutes, April 28, 1993 TASY 0436

Subgroup I, Series III: Electronic Industries Association (EIA), Box 15

Annual Report, 1989
EIA Bar Code Technology Assessment, 1996
EIA Committee, January-March 1995
EIA Committee, April 1995
EIA Committee, May 1995
EIA Committee, June-August 1995
EIA Committee, September 1995
EIA Committee, October-December 1995

Box 16

Bar Code Committee Correspondence, January-February 1996
Bar Code Committee Correspondence, March-April 1996
Bar Code Committee Correspondence, May-June 1996
Bar Code Committee Correspondence, July 1996
Bar Code Committee Correspondence, August-September 1996
Bar Code Committee Correspondence, October 1996
Bar Code Committee Correspondence, November-December 1996

Box 17

Bar Code Committee, January-February 1997
Bar Code Committee, May-June 1997
Bar Code Committee, March-April 1997
Bar Code Committee, March-April 1997
Bar Code Committee, May-June 1997

Box 18

EIA + ANSI Standards & Meetings (f1), 1975-1988
EIA + ANSI Standards & Meetings (f2), 1975-1978
EIA Bar Code Committee Meeting, July 12-13 1995
Bar Code Committee Meeting Fort Myers, Florida, September 6-7 1995
Bar Code Committee Meeting, December 14-15 1995
EIA Bar Code Committee Meeting Phoenix, Arizona, February 20-22 1996
EIA Bar Code Subcommittee Meeting Dayton, Ohio, April 1996
EIA Bar Code Committee Meeting Baton Rouge, Louisiana, February 12-13 1997
EIA Bar Code Meeting Washington D.C, July 14-16, 1997

Box 19

Bar Code Committee Meeting, July 17, 1997
EIA Bar Code Committee Meeting San Francisco, California, October 7-9, 1997
Bar Code Committee Meeting Minutes, October 1997
Bar Code Committee Meeting Minutes, January 1998
EIA Meeting Washington D.C, March 15-19, 1998
Bar Code Committee Meeting Minutes, April 1998
Bar Code Committee Meeting Action Items, June 23-25, 1998
Bar Code Committee Minutes Member Rosters, June 22, 1998
Taber Testing Info, May 15-June 7, 1998
JEDRC Ballot, May 8, 1998
PN 3497 Ballots, April 10, 1998
Meeting Agenda, June 24, 1998
EIA Bar Code Committee Meeting San Antonio, Texas, April 6-7, 1999
EIA 556, January 1, 1989
EIA 556 ANSI Bar Code print quality standard X3.182-1990, January 22, 1990
EIA 556 Fact St., October 2, 1989
EIA 556-Eldon LTR to EIA Re: 556-A Strategy + 556 Status, March 22, 1990
EIA 556-KBG 1st Draft of 556-A Meeting, October 16, 1989
EIA 556-ABG Final Draft 556-A EIA, N.D.
EIA 556-Appendix D 536 Reissue Strategy, April 6, 1990

Box 20

EIA-556 New Label Format Proposals, N.D.
EIA 556 UCC/EAN Correspondence, N.D.
EIA 556 PEPS Vote, May 7, 1990
EIA 556 EIA PEPS, December 13, 1990
EIA 556 EIA/IS 61 Consumer… Standard, April 1990
EIA 556 EIA Style Manual, N.D.
EIA SP-2957 Ballot Review Summary, March 2, 1992
EIA SP-2957 Ballot Meeting, March 18, 1992
EIA 556-A ANSI Review, July 1992
EIA 556-A ATT Trademark and Patent Corres. October -November 1992
Outer Shipping Container Label EIA-556-B (page proof), N.D.
Outer Shipping Container Label Standard Documentation, December 5, 1997-June 22, 1998
Outer Shipping Container Label Standard EIA 556-B, November 11, 1998
Outer Shipping Container Label EIA 556- B, October 19, 1997

Box 21

Retail Bar Code Committee Correspondence, February 2, 1993-March 15, 1995
Retail Bar Code Committee ISGI (Send) Revision, December 15, 1992-June 14, 1994
Retail Bar Code Committee EIA-621 Proof, N.D.
Standard Proposal 3176 EIA-621 Exhibit D + Ballot, October 5, 1993
Bar Code Committee PN-3132 Draft/Ballot, July 1995
PN- 3132 Bar Code Committee Minutes, February 21-22, 1996
PN-3132 Bar Code Committee Minutes, April 29-30, 1996
PN-3132 Component Marking Ballot, May 12, 1996-August 6, 1996
PN-3132 Component Marking Standard (Draft), February 13, 1997
PN-3132 Comments/Correspondence, October 15, 1996-April 24,1997
PN-3497 Web Version, August 15, 1998
PN-3497 GMU Revision, September 2, 1998
PN-3497 (draft) Product Marking Standard, July 28, 1998

Box 22

PN-3497 Product Marking Web Version, April 21, 1998
PN-3497 Product Marking Standard U-6, April 21, 1998
PN-3497 Draft Proposal, N.D.
PN-3497 Product Marking (draft), January 22, 1998
PN-3497 Patent Memorandum, March 5, 1999
PN-3494 Documentation (f1), April 7, 1997-May 29, 1997
PN-3494 Documentation (f2), April 7, 1997-May 29, 1997
PN-3494 Documentation (f3), April 7, 1997-May 29, 1997
PN-3497 Product Marking Ballot/Draft, May 12, 1996
GEG Bar Code/2D Marking, June 22, 1996
PN-3487 Revision Draft, November 17, 1998
PN-3497 (draft) Product-Making Standard, February 17, 1999

Box 23

EIA Industrial Bar Code Subcommittee Correspondence, 1991-1992
PEPS Annapolis, MD Meeting, September 22, 1992
PEPS Orlando, FL Meeting, February 4, 1993
PEPS IBC Subcommittee West Palm Beach, FL Meeting, March 2-3, 1993
PEPS Palm Beach Florida Meeting, March 2-3, 1993
PEPS Industrial Bar Code Subcommittee Meeting Minutes, March 2-3, 1993
PEPS Industrial Bar Code Subcommittee Meeting San Jose, CA, June 22-23, 1993
PEPS Industrial Bar Code Subcommittee Meeting, June 12-13, 1993
PEPS Retail Bar Code Committee Dallas, TX Meeting, September 1-2, 1993
PEPS Industrial Bar Code Subcommittee Meeting, September 1-2, 1993

Box 24

EIA Industrial Bar Code Subcommittee Dallas, TX Meeting, September 1-2, 1993
PEPS Industrial Bar Code Subcommittee Meeting, November 17-18, 1993
EIA Industrial Bar Code Subcommittee Meeting St. Petersburg Beach, FL, November 17-18, 1993
EIA Industrial Bar Code Subcommittee Meeting Las Vegas, January 1994
PEPS Industrial Bar Code Subcommittee Meeting, January 11-12, 1994
EIA San Francisco Meeting, January 31-February 1, 1994
PEPS Industrial Bar Code Subcommittee Meeting, April 12-13, 1994
PEPS Industrial Bar Code Subcommittee Meeting San Antonio, TX, April 19-20, 1994
PEPS Industrial Bar Code Subcommittee Intel Meeting, June 21, 1994
PEPS Industrial Bar Code Subcommittee Meeting, July 12-13, 1994
PEPS Industrial Bar Code Subcommittee Meeting-October/September 1994, July 12-October 5, 1994

Box 25

PEPS Industrial Bar Code Subcommittee Meeting, October 4-5, 1994
PEPS Industrial Bar Code Subcommittee Meeting Atlanta, GA, October 4-5, 1994
PN 3133 Ballot Review EIA 624, October 1, 1994
EIA 624 PN 3133 Drafts, July 18, 1991-October 1, 1994
PN 3133 (Draft) Product, March 1, 1994
EIA-556A Outer, July 1992
PEPS Industrial Bar Code Subcommittee Meeting Orlando, FL April 18-19, 1995, March 9 1995-April 19, 1995 (f1)
PEPS Industrial Bar Code Subcommittee Meeting Orlando, FL April 18-19, 1995 September 30, 1994-April 19, 1995 (f2)

Box 26

EIA CEG PEPS Retail Bar Code Subcommittee IS-61 (f1), June 12, 1992-January 1993
EIA CEG PEPS Retail Bar Code Subcommittee IS-61 (f2), June 1992-January 1993
EIA CEG PEPS Retail Bar Code Subcommittee IS-61 (f3), June 1992-January 1993
PEPS Bar Code Taskforce 2117, July 8, 1987-May 27, 1988
PEPS Bar Code Taskforce Kansas City Meeting, October 12-13, 1987
PEPS Washington D.C Meeting, April 13, 1988
PEPS Bar Code Taskforce SP 2308 /SP 2222, March 6, 1989-July 9, 1990
PEPS Bar Code Taskforce 4 Danvers, MA Meeting, June 10-11, 1991
PEPS Bar Code Taskforce 4 Sunnyvale, CA Meeting, September 17-18, 1991

Box 27

Bar Code Taskforce # 4 SP2957 Ballots/Draft, January 9, 1992-February 2, 1992
PEPS-NEMA, September 1990-March 1991
PEPS Meeting # 23/24, April 10, 1991
PEPS UCC, February-March 1991
PEPS Task Group # 4 Meeting Tucson, AZ, December 13, 1990
EIA 556, January 1989
Bar Coding Task Force Meeting at HP, October 16, 1989
IS-61, December 1990
556-A Draft, March 13, 1991
5560A Draft, May 16, 1991
IS-62 Comments/Responses, May 24, 1990
EIA 624 Proof, N.D.
EIA 624 EDEC Ballot, N.D.
EIA 624 Final EIA-624 Document, October 1, 1994
EIA 624 Reversal of Negative Votes, N.D.
EIA 624 Committee Response to Public Review, August 23, 1994
EIA 624 Meeting to Resolve Comments, July 12-13, 1994
EIA 624 Summary Ballot, N.D.
EIA 624 Ballot Response, April 27, 1994
EIA 624 PN 3133, March 24, 1993
EIA 624 PEPS Meeting, April 12-13, 1994
EIA 624 PEPS Committee Ballots Response and Review, December 3, 1993-February 4, 1994

Box 28

Global Electronics Guideline Bar Code, N.D.
Global Electronics Guidelines Bar Code/2D Marking Draft, August 3, 1994
Global Electronics Meeting Minutes Long Branch, NJ, March 8-9, 1995
Global Electronics Guidelines Bar Code… Draft, January 3, 1996
Global Electronic Guidelines Bar Code/2D Draft, May 12, 1996
EIA 1997 Meeting Information EIA Issues, February 21-August 7, 1997
2D Standard Questionnaire, May 26, 1997
EIA 1997 Meeting Info Global Electronic Guidelines, June 7, 1996-February 20, 1997
EIA SPEC 2000 Correspondence, N.D.
TCIF Product Marking Implementation Guideline, September 5, 2000
EIA-802 Standard Approval, September 13, 2000
EIA 624 (PN 4516) Drafts, July 13-October 25, 2000
2D Print Quality Correspondence EIA Meeting, October 24, 2000
EIA September 1999 Meeting, September 3, 1999

Box 29

ADC Product Marking Standard (f1), 1999
ADC Meeting Product Marking Standard (f2), January 2000
ADC Meeting, January 2000
ADC Committee Meeting Annapolis, MD (f1), July 11-12, 2000
ADC Committee Meeting Annapolis, MD (f2), July 11-12, 2000
ADC Committee Meeting Annapolis, MD (f3), July 11-12, 2000

Box 30

2-D Symbology, December 3, 1993-September 30, 1997
Project Management, N.D.
AT&T Shipping and Receiving Bar Code Label Standard, January 2, 1992
AT&T Network Systems Review BC/2D Marking, August 3, 1994- September 7, 1995
EDIFICE- PDG Review Bar Code/2-D, October 11, 1995
QED Systems Markup Draft BC/2D Marking and EDI Shipping Data, May 25, 1995
EDIFICE Bar Code Group Meeting Notes, 1989-1991
EDIFICE Bar Code Group Meeting Siemens, Munich, December 1, 1992
EDIFICE Bar Code Label Implementation Guide for Shipment I.D Issue 0.4, 95-05-05, N.D.
EDIFICE Physical Distribution EDI Implementation Kit, April 13-June 6, 1994
EIAJ-EDI Standard Bar Code Label System Standard, N.D.
EIAJ-EDI Standard, April 1992

Box 31

EDI Development in Japan, 1994-1995
EIDX Meeting Minutes, March 31-April 3, 1993
Tokyo Meeting October 1994, December 2, 1993-September 26, 1994
Global Electronics Industry Meeting Minutes Tokyo, Japan (Folder marked ROFF) November 16-17, 1995
Phoenix, AZ Global Electronic Meeting February 1996, November 16, 1995-February 21, 1996
International Bar Code Standards Activities, May 11, 1990-April 3, 1991
International Electronics Industry Bar Code Standards Global Perspective Q.E.D Systems, N.D.
Inter-Regional Electronic Standards Meeting Minutes Tokyo, Japan, October 20-21, 1991
International Standard Activity Correspondence, November 2, 1994-April 4, 1995
International Standard Activity International Electronics Industry Bar Code Standards Consortium Meeting March 8-9, 1995
International Standard Activity Product Lab Drafts, N.D.
International Standard Activity Product Package Draft, February 1995
International Standard Activity Shipping and Receiving Label Draft, October 10, 1994-March 9, 1995
International Standard Activity X12 Migration Plan Paper, January 13, 1995

Box 32

International Standard Activity EDIFACT DESADV Message, November 30, 1994
Joint Electronics Industry Meeting Stockholm, Sweden, June 8-9, 1995
Joint Electronics Physical Distribution Meeting Minutes Dallas, TX, December 1, 1993 Report
TEDIS, June, 1990
World Wide Electronic Industry Meeting Busbane, CA, March 31-April 1, 1998

Subgroup I, Series IV: Federation of Automated Coding Technologies (FACT), Box 33

AIM Proposal, January-October 1985
AIM Proposal, February 24, 1986-January 12, 1988
Experimental Study of Bar Code Reliability: A Proposal to AIM, December 1983-December 1984
FACT Data Identifier Workgroup Meeting Minutes, April 19, 1988
FACT General Meeting, April 28, 1989
FACT Label Standard Workgroup September 12, 1989 Meeting Minutes, September 20, 1989
FACT Label Standard Workgroup October 11, 1989 Meeting Minutes, November 6, 1989
FACT Label Standard Workgroup November 30, 1989 Meeting Minutes, December 12, 1989
FACT Standard Label Workgroup, February 13, 1990
FACT Standard Label Workgroup Meeting Minutes, March 27, 1990
FACT Standard Label Workgroup Meeting Minutes, May 10, 1990
FACT Common Label Workgroup June 28, 1990 Meeting Minutes, August 2, 1990
FACT Initiative 2000 Ad Hoc Planning Committee September 13, 1990 Meeting Minutes, February 15, 1991
FACT Initiative 2000 January 9, 1992 Meeting Minutes, March 2, 1991
FACT Initiative 2000 February 21-22 1991 Meeting Minutes, April 19, 1991

Subgroup I, Series IV: Federation of Automated Coding Technologies (FACT) -Series V: International Electro technical Commission(IEC/TC 91), Box 34

FACT General Meeting Minutes, March 20, 1991-April 4, 1991
FACT Initiative 2000 May 14, 1991 Meeting Minutes, June 19, 1991
FACT Initiative 2000 September, 24-25 Meeting Minutes, October 31, 1991
FACT Initiative 2000 June 15, 1992 Meeting Minutes, August 25, 1992
FACT Initiative 2000 June 15, 1992 Meeting Minutes, August 25, 1992
IEC TC91 WG1 Convenor 33 Bar Code Taskforce Meeting (Unconfirmed notes) Berlin, February 4-5, 1999
IEC TC91 Packing Labels for Electronic Components Draft, September 28, 1999
IEC TC91 Correspondence, May 28, 1999-October 25, 1999
IEC TC 91 Packing Labels for Electronic Components Draft, September 1, 1999

Subgroup I, Series VI: International Standards Organization (ISO/TC122), Box 35

ISO TC122/WG4 Draft, October 13, 1996
ISO TC122/WG4 Draft N96-055, October 1996
ISO TC122/WG4 N96-056, November 2, 1996
ISO TC122/WG4 Correspondence N96-057-N96-059, August 1996
ISO TC122/WG4 Draft N96-060, October 1996
ISO TC122/WG4 Correspondence N96-061-N96-067, August 1996
ISO TC122/WG 4 Documentation N96-068 N96-081, November 29-December 24, 1996
ISO TC122/WG4 Documentation, April 2, 1997-May 23 1997
ISO TC122/WG7 Document Register, June 18, 2000-August 24, 2000
ISO TC 122/WG4 Notes, January 1-February 16, 1996
ISO TC 122/WG4 Notes, February 1996
ISO TC 122 WG4 Notes/Correspondence, November 1995-February 1996
ISO TC 225/WG2 Test Specification, March 10, 1997

Box 36

ISO 3166, August 15, 1988
ISO TC 122 WG4 Packaging, March 1993-April 1996
ISO TC 122 WG4 Documentation, March 7, 1994-September 20, 1996
ISO TC 122 WG4 Documentation N96-001-N96-002, 1993-1995
ISO TC 122 WG4 Documentation N96-003, March 31, 1996
ISO TC 122 WG4 Documentation N96-004-N96-009, May 1995-March 1996
ISO TC 122 WG4 Correspondence N96-010-N96-021, November 15, 1995-June 14, 1996
ISO TC 122 WG4 Documentation N96-022-N96-033, May 12, 1996-April 5, 1996
ISO TC 122 WG4 Correspondence N96-034-N96-049, May 1995-June 1996
ISO TC 122 WG4 Correspondence N96-050-N96-053, August-September 1996

Subgroup I, Series VII: Committee of European Normalization (CEN), Box 37

CEN TC 225 Correspondence, May 31, 1994-November 1, 1995
CEN TC 225 Briefs 176-180, June 27, 1995-August 4, 1995
CEN TC 225 Briefs 181-212, August 16, 1995-February 14, 1996
CEN TC 225 Briefs 215, February 22, 1996
CEN TC 225 Briefs 229, July 4, 1996
CEN TC 225 Brief 233-241, July 6, 1996-August 8, 1996
CEN TC 225 PREN 1556 Draft, October 1994
CEN TC 225 PREN 157 + 1572, July-August 1995
CEN TC 225 PRENV YYY + ZZZ (5th Draft), February-March 1996
CEN TC 225 PRENV PPP (9th Draft), February 1996
CEN TC 225 N500-N595, July 5, 1995-September 12, 1996
Information Technology Steering Committee, February 11, 1990-April 16, 1991

Subgroup I, Series VIII: Telecommunications Industry Forum (TCIF), Box 38

Sub-series I: General Meetings

General Meeting (Agenda Only), December 9-16, 1986
TCIF General Meeting, June 2-4, 1987,
TCIF General Meeting, June 15-16, 1988
TCIF General Meeting, June 15-16, 1988
TCIF General Meeting, June 14-15, 1989, May 10-July 11, 1989
TCIF General Meeting, June 13-14, 1990
General Meeting (f1), June 10-13, 1991, July 1-29, 1991
General Meeting (f2), June 10-13, 1991, July 1-29, 1991
June 10-11, 1992 Meeting (f1), June 10-11, 1992
June 10-11, 1992 Meeting (f2), June 10-11, 1992
TCIF General Meeting, June 11-13, 1993
June 14, 1994 Meeting, June 14, 1994

Subgroup I, Series VIII: Telecommunications Industry Forum (TCIF),

Sub-series I: General Meeting’s cont.-Sub-series II: Annual Meetings, Box 39

TCIF General Meeting, June 20, 1995, May 19, 1995-July 29, 1995
TCIF Annual Meeting, June 3-5, 1986
TCIF Annual Meeting, December 9-11, 1986
Annual Forum Meeting, June 2-4, 1987
TCIF Annual Meeting, December 1-3, 1987, October 27, 1987-December 3, 1987
TCIF Annual Meeting, December 1-3, 1987
TCIF Annual Meeting, November 29-December 1, 1988, November 11-January 4, 1989
TCIF Annual Meeting, November 30, 1988
TCIF Annual Meeting, December 6-7, 1989
TCIF Annual Meeting, December 10-13, 1990, December 10, 1990-January 2, 1991
TCIF Annual Meeting, December 11-12, 1991
TCIF Annual Meeting, December 9, 1992

Box 40

TCIF Annual Meeting, December 9-10, 1992, December 9-January 6, 1993
TCIF Annual Meeting (f1), December 8, 1993
TCIF Annual Meeting (f2), December 8, 1993
TCIF Annual Meeting (f1), December 5-9, 1994, December 5, 1994-January 16, 1995
TCIF Annual Meeting (F2), December 5-9, 1994
December 1995 Meeting, December 1995 Meeting

Subgroup I, Series VIII: Telecommunications Industry Forum (TCIF),

Sub-series II: Annual Meetings cont.-Sub-series III: Executive Committee, Box 41

Annual Meeting, December 2-6, 1996
Annual Meeting, December 9, 1997
TCIF Chapter, N.D.
TCIF Bylaws, August 13, 1992
TCIF Bylaws, May 25, 1993
1994 & 1996 Bylaws, 1994, 1996
Review (f1), 1998
TCIF Bylaws, December 3, 1986-January 13, 2000
1994 Procedures, 1994
TCIF Procedures, December 1995
Correspondence, March 6, 1987-November 7, 1987
TCIF Executive Board Meeting, February 19, 1989-October 6, 1989
TCIF Executive Board Meeting, September 28-29 & January 11-12, 1989
Press Releases, N.D.
TCIF Restructure Proposal, December 4, 2000
Conference Call, March 27, 1997-February 16, 2000
UCC/EAN Composite Symbology Samples, June 5, 1998

Subgroup I, Series VIII: Telecommunications Industry Forum (TCIF),

Sub-series III: Executive Committee cont.-Sub-series IV: Bar Code Committee, Box 42

Ballots, 1991-1992
Ballots, 1993
Ballots, 1994
Ballots, 1995-1996, 1986
Bar Code Committee, March 31, 1986-September 22, 1987
Bar Code Committee Meeting, October 9, 1987-November 30, 1987
Bar Code Committee Meeting, December 2-15, 1987

Box 43

Bar Code Committee Meeting, January 5, 1988-November 29, 1988
Bar Code Committee Meeting, February 13, 1989-April 20, 1989
July 25-26, 1989 Meeting, July 25-26, 1989
2D Product Marking (f1), November 15, 1994-April 5, 1996
2D Product Marking Report (f2), February 4, 1997
Correspondence, 1987-1992
Correspondence, 1994
Correspondence, 1995-1996
TCIF Implementation Guide to Package Labeling, June 1999

Box 44

Packaging Container…Specification, June 1987-October 1995
Bar Code Committee, May 2, 1989-August 14, 1989
October 18-19, 1989 Meeting, October 18-19, 1989
Bar Code Committee Meeting, October 25, 1988-February 21, 1989
Bar Code Committee Meeting, September 12, 1989-December 19, 1989
February 6-7, 1990 Meeting, February 6-7, 1990
Bar Code Committee Meeting, April 17-18, 1990
June 12, 1990 Meeting, June 12, 1990
Bar Code Committee Meeting, June 12, 1990-December 13, 1990

Box 45

Bar Code Committee Meetings, January 2, 1991-June 10, 1991
Bar Code Committee Meeting, June 11-28, 1991
April 17-18, 1991 Meeting, April 17-18, 1991
Bar Code Committee Meeting, August 11-14, 1991
Bar Code Committee Meetings, October 15-16, 1991
Bar Code Meeting, December 12, 1991
August 19, 1992 Meeting, August 19, 1992
February 17, 1993 Meeting, February 17, 1993
April 20-21, 1993 Meeting, April 20-21, 1993
Bar Code Committee Meeting, April 20-21, 1993
Bar Code Committee Meeting, February 17, 1993
Bar Code Committee Meeting, June 7-8, 1993, June 3-August 4, 1993

Subgroup I, Series VIII: Telecommunications Industry Forum (TCIF),

Sub-series IV: Bar Code Committee cont., Box 46

August 17-18, 1993 Meeting, August 17-18, 1993
September, 1993 Meeting, September, 1993
October 12-13, 1993 Meeting, October 12-13, 1993
December 9, 1993 Meeting, December 9, 1993
February 15, 1994 Meeting, February 15, 1994
April 20-24, 1994 Meeting, April 20-24, 1994
June 15, 1994 Meeting, June 15, 1994
August 17-18, 1994 Meeting, August 17-18, 1994
October 11-12, 1994 Meeting, October 11-12, 1994
April 5-6, 1995 Meeting, April 5-6, 1995
June 21, 1995 Meeting, June 21, 1995
October 17-18, 1995 Meeting, October 17-18
December 7, 1995 Meeting, December 7, 1995
February 13, 1996 Meeting, February 13, 1996
April 18, 1996 Meeting, April 18, 1996
June 17, 1996 Meeting, June 17, 1996
August 15, 1996 Meeting, April 15, 1996
Bar Code Standard Coding Committee, February 22-24, 2000

Subgroup I, Series VIII: Telecommunications Industry Forum (TCIF),

Sub-series V: Standard Code Committee, Box 47

Item Interchangeability, April 24, 1996-January 8, 1997
Standard Code Committee Meeting, June 4, 1986
Standard Code Committee Meeting August 18-19, 1997 Meeting, August 18-19, 1997
Standard Code Committee Meeting October 29-30, 1987 Meeting, October 29-30, 1987
Standard Code Committee Meeting, December 15, 1987-March 28, 1988
Standard Code Committee Meeting, February 9-11, 1988, January 26-April 18, 1988
Standard Code Committee Meeting, February 9-11 1988, March 28-April 6, 1988
Standard Code Committee Meeting, June 14, 1988, June 2-July 24, 1988
Standard Code Committee Meeting, August 17, 1988, August 17-November 10, 1988
Documentation, March 2, 1989-April 28, 1989
Documentation, May 25, 1989
Documentation, June 3, 1989-November 1, 1989
Documentation, January 2-October 19, 1990
Documentation, November 9, 1990-April 17, 1991

Box 48

Documentation, June 10, 1991-November 21, 1991
Documentation, April 2, 1992-November 2, 1992
Documentation, January 11, 1993-June 17, 1993
Documentation, July 20, 1993-September 17, 1993
Documentation, November 3, 1992-December 3, 1993
December 7, 1993 Meeting, December 7, 1993
January 18-19, 1994 Meeting, January 18-19, 1994
February 16-17, 1994 Meeting, February 16-17, 1994
April 19-20, 1994 Meeting, April 19-20, 1994 Meeting
August 16-17, 1994 Meeting, August 16-17, 1994
December 6, 1994 Meeting, December 6, 1994
February 8-9, 1995 Meeting, February 8-9, 1995
April 4-5, 1995 Meeting, April 4-5, 1995
June 22, 1995 Meeting, June 22, 1995
August 15, 1995 Meeting, August 15, 1995
December 5, 1995 Meeting, December 5, 1995
August 13, 1996 Meeting, August 13, 1996
Standard Code Meeting, February 14-15, 1996
April 16-17, 1996 Meeting, April 16-17, 1996
June 18-19, 1996 Meeting, June 18-19, 1996
Product Identification, September 16, 1987-January 14, 1988

Subgroup I, Series VIII: Telecommunications Industry Forum (TCIF),

Sub-series VI: EDI Committee, Box 49

Correspondence, June 24, 1987-April 4, 1997
TCIF/EDI Architecture Robert Canis, N.D.
EBDI Subcommittee Meeting, June 10, 1986
EDI (EBDI) Meeting, September 16-18, 1986
EBDI Meeting, December 10-11, 1986
EBDI Committee Meeting, May 19-21, 1987
Electronic Commerce Strategic Planning Meeting, January 15-28, 1993
Electronic Commerce Workgroup, June 11, 1993
EDI Committee Meeting, June 3, 1987
EDI Committee Meeting, August 18-20, 1987
TCIF EDI Meeting, June 13-16, 1988
TCIF EDI Meeting, August 17, 1988

Box 50

TCIF EDI Meeting, November 29, 1988
TCIF EDI Meeting, June 13-14, 1989
TCIF EDI Meeting, April 23, 1990, May 25-June 5, 1990
TCIF Meeting, June 11, 1990, May 2, 1990-August 7, 1990
TCIF Meeting EDI, October 13-16, 1992
EDI Meeting, December 7, 1992, January 18, 1993
EDI Meeting, June 7-10, 1993, July 1-13, 1993
TCIF EDI Meeting (f1), September 20-24, 1993, October 13-14, 1993
EDI Meeting (f2), September 20-24, 1993, October 5-December 8, 1993
September 20, 1993(f3), September 20, 1993

Box 51

December 6, 1993 Meeting, December 6, 1993
March 7, 1994 (Ballots), March 7, 1994
EDI Meeting (Agenda Only), June 8, 1998
TCIF Implementation Guide for EDI Chapter 7, January 1995
…Engineering Complaint, N.D.
Product Service Claim (TS141), N.D.
Product Service Claim (TS142), N.D.
TCIF Customer Service Guidelines, Issue 6, N.D.

Subgroup I, Series VIII: Telecommunications Industry Forum (TCIF)

Sub-seriesVII: IPI Committee-Sub-series VIII: BCSC Committee, Box 51

Documentation, March 23, 1989-October 25, 1989
Documentation, May 1, 1989-September 11, 1989
Documentation, October 3, 1989-September 24, 1990
Documentation, October 30, 1990-November 15, 1990

Subgroup I, Series VIII: Telecommunications Industry Forum (TCIF)

Sub-seriesVII: IPI Committee, Box 52

Documentation, February 25, 1992
Documentation, January 19, 1993-February 24, 1993
Documentation, July 8, 1993-August 25, 1993
Documentation, November 2, 1993
Meeting Minutes, December 6-8, 1993
Meeting Minutes, February 17-18, 1994
Meeting Minutes, February 23-24, 1995
Meeting Minutes, April 27-28, 1996

Subgroup I, Series VIII: Telecommunications Industry Forum (TCIF)

Sub-seriesVIII: BCSC Committee, Box 52

2D Coding, October 13, 1997-February 5, 1998
Correspondence (General), July 9, 1990-October 16, 1990
Correspondence October Bar Code Committee Meeting, October 16-November 26, 1990
Correspondence IDI & SGML Committee, May 1, 1989-April 11, 1991
Correspondence Product Label Standard, December 10 1990-March 19, 1991
Correspondence IPI Issues, June 11, 1990-April 11, 1991
Correspondence February Meeting, January 4, 1991-April 4, 1991
Correspondence-Kansas City Meeting, April 2, 1991-May 20, 1991
Correspondence, December 16, 1993-February 4, 1998

Box 53

Meeting, April 17, 1996
Meeting, August 14, 1996
Meeting, October 15-16, 1996
Meeting, December 4-5, 1996
Meeting, February 11-13, 1997
Meeting, October 15, 1997
Meeting, December 8-11, 1997
Meeting, February 11, 1998
Meeting, March 10, 1998
Meeting, April 14, 1998
Meeting, May 4, 1998
Meeting, June 8-10, 1998
Meeting, July 14, 1998
Meeting, August 11-13, 1998
Meeting, April 13-15, 1999
Meeting, June 14-16, 1999
Meeting, August 17-19, 1999
Meeting, October 19-21, 1999
Meeting, December 7-11, 1998
BCSC Meeting (f1), December 6-8, 1999

Box 54

BCSC Meeting (f2), December 6-8, 1999
Product ID Guidelines, September 3, 1996-February 11, 1998
Product Supply Chain Model Workshop, July 14, 1998
Service Order Subcommittee Meeting, March 8-11, 1993
Service Order Subcommittee Meeting, April, 1993
Service Order Subcommittee Meeting, June, 1993
Service Order Subcommittee Meeting, October 25, 1993
Service Order Subcommittee Meeting, December 6, 1993
Service Order Subcommittee Meeting, January 31, 1994
Service Order Subcommittee Meeting, March 7-10, 1994
Service Order Subcommittee Meeting Minutes, April 25-28, 1994
Service Order Subcommittee Meeting (f1), March 20, 1995
ECIC/PIC/94-014-R9 (f2), March 20, 1995

Subgroup II: Business Papers

Series I: Subject Files, Box 55

About the UPC, 1986
Alliance for Telecommunications Industry Solutions, 1993-2000
ASC X 12, March 29, 1988-May 12, 1988
AT&T Bar Code Issues, January-March 1993
AIDC 100, May 13-June 6, 1997
Automatic ID Systems for Material Handling, 1976
Bar Code Basics (Scanamatic), N.D.
Bar Code Market Survey, N.D.
Bar Code Scanning, 1980
Bar Code Technology Present State, Future Promise, N.D.
H.E Burke, March 19, 1983-July 15, 1983
Center for the Information of Industry CII Syntax Rule, March 1993
CII EDI Activities in Japan, June 1994
CIAS, Inc. (Binary Code Binary), 1993
Code 128 Introduction, February 8, 1982
Consumer Electronics Association TSC EXCOM Meeting Minutes, January 22, 2001
Correspondence (JTC), March 15-August 14, 1995
Data Collection Industry Report-Brown Brothers Harriman, October 2, 1989
Demand Label Printing in Bar Code Application, N.D.
EDI and Bar Code Implementation Seminar (Symbol Technologies Continuing Education Series) (f1), May 1991

Box 56

EDI and Bar Code Implementation… (F2), May 1991
EDI and Bar Code Implementation… (F3), May 1991
Elements of a Bar Code System (Hewlett Packard), November 1982
Generic Requirements, January 16, 1997
Gentry Associates Inc., N.D.
HIBC Conference Interim Work Packet, July 7-September 13, 1983
HIBC Conference Task Force, August 5-September 13, 1983
HIBC Conference, June 28-29, 1983
HIBC Conference Second Plenary Session, October 4-5, 1983
HIBC Conference, 1984
HIBC Conference ’90, June 20-22, 1990
IBM, May 4-December1, 1992
Intermec Patent Material, February 11-October 27, 1999
Key Entry Bypass or, N.D.
Lasers (Levine, Albert), 1963
MCI WorldCom Bar Code Shipping Label, January 16, 1991

Box 57

MCI WorldCom Labeling Requirements, April 7, 2000
Manufacturing Process and Automation Meeting, March 26, 1986
MSI Data Correspondence, 1974
Motor Carrier Industry, June 28, 1996
NEMA Bar Code Standard WC60.1-199X, January 30-March 27, 1992
NEMA Bar coding, July-December, 1991
NEMA Bar coding, January 1993
NEMA Bar coding, March-May 1993
NEMA Bar coding, July-September 1993
NEMA Bar coding, January-March 1992

Box 58

NEMA Bar coding, April 1992
NEMA Bar coding, May-July 1992
NEMA Bar coding, August 1992
NEMA Bar coding, September-November 1992
NEMA Bar coding, December 1992
NEMA Bar coding and Business Guidelines, September 8, 1993-October 18, 1993
OCR Wand Media Manual, 1976
Pressure Sensitive Materials Selection Guide, 1983

Box 59

Recommendation… (PMA), June, 1991
Rochester Institute of Technology UPC Seminar, March 11-12, 1976
Scan Tech 1986 Proceedings, 1986
Siemens Benefits of Using Bar Code, December 1995
SPIES 26th International, August 21-27, 1982
Steel Reel Tracking, August 30, 1994
UCC-ICAC, April 1994-February 1995
UCC-ICAC, March-April 1995
UPC Implementation Guide, December 1991

Subgroup II, Series II: Standards & Specifications, Box 59 Cont.

Hewlett Packard, N.D.
Intel, February 15, 1990
Intermec, 1982
IBCA, October 1990
Kmart, August 29, 1991
Laserlight System Inc., October 6, 1998
Military Standard 129F, April 20, 1970

Subgroup II, Series II: Standards & Specifications, Box 60

MIL Stan. 129J, September 15, 1986-October 3, 1986
MIL Stan. 130H, September 29, 1992
MIL Stan. 1189A, September 4, 1984-April 14, 1989
MIL Stan. 1189B, September 6, 1988-March 17, 1989
MIL. Stan. L. 61002, February 1-March 29, 1990
MIL Stan. L-XXXXX, October 21, 1987
National Wholesale Druggist Association, 1993
NCR (B-1-B6), 1990
PowerShipPlus, June 12, 1991
UPS, November, 1991
UCC Standards & Spec, March 1975-January 1986
USS-I 2/5 Draft, July 30, 1985
3M, February 1985
Aluminum Association, 1985
American Paper Institute, November 1, 1983
Bell Communications, December 1984-January 1991
Computer Identics Corporation, October 9, 1981
Digital Equipment Cooperation, August 11, 1993

Box 61

Electrical Industry, June 7, 1993
FIBC, N.D.
Getting the Right People for Standard Committee and TAGS (f1), March 26-June 1, 1987
Getting the Right People for Standard Committee and TAGS (f2), March 25-June 1, 1987
GTTE, January, 1985-June, 1986
Graphic Communications Association, July 17, 1984-October 20, 1988
Gray Bar, June 1993-November 1994
Health Industry, March 15, 1984-March 4, 1994
UCC Standards and Specifications, September 1986-December 1995
UCC, January 1992-October 1994
Wal-Mart (f1), N.D.

Box 62

Wal-Mart (Monarch Marking) (f2), N.D.
Wal-Mart (Monarch Marking) (f3), N.D.
Common Language Bell System Requirement and Material Code, N.D.
KS-22075 Bar Code Scanner Issue 4 (f1), May 15, 1979
KS-22075 Bar Code Scanner Issue 4 (f2), May 15, 1979
KS-22076 Field Recorder Bar Code ISS 1 January 23, 1980 ISS 2 February 20, 1980 ISS 3 March 20, 1980
RF Tag Testing, March 22, 1999

Subgroup II, Series III: Research Notes, Box 63

Bar Codes 1988 (AT&T) (f1), January 8-April 4, 1988
Bar Codes 1988 (AT&T) (f2), January 29-September 19, 1988
Bar Codes 1988 (AT&T) (f3), May 31-August 16, 1988
Brady Test Results, September 21, 1998
Global Electronics Industry Meeting, June 6-7, 1995
BISP Pics/DCPR (f1), March 30, 1976-November 29, 1979
Charter (f2), October 21, 1975-March 15, 1976
EMB 57 CLE Code Marking Inst. (f3), June 1977
Association BSP’S (f4), February, 1976
Herman Memo (f5), September 10, 1975
OCR Experts (f6), November 13, 1974-March 17, 1976
Literature (f7), N.D.

Box 64

Bell Telephone Laboratories Inc. Notebook, N.D.
Ameritech District Center Notebook, N.D.

Subgroup II, Series IV: Presentations, Box 65

ANSI MH 10.8M Keys To Success, 1983
ANSI MH 10.8M Meeting, 1983
ANSI X3 A1.3 Bar Code Print Quality (Draft), March 4, 1986
ANSI X3 A1.3 Draft, April 8, 1986
EDGE Definition, February 10, 1987
Bell Inventory Field Note, July 8, 1980-March 2, 1981
January 23, 1978 Draft, January 23, 1978
Bell Inventory Charts, N.D.
Bell Inventory Transparencies, N.D.
Bell Inventory Overhead Transparencies, N.D.
Photograph, N.D.
Bar Code Scanning, July 7, 1983
Bar Code Scanning Chart Copies, N.D.
Bar Code Scanning Overhead, N.D.
Bar Code Scanner Specification KS-22075, March 1, 1978
Bar Code Scanner KS-22075 Photo, N.D.
Bar Code Scanner KS-22075 Overheads, N.D.
Box 66
OCR & Bar Code Feasibility Study, June 1976
Status of Bar Code Labeling and Scanning of Plug In, N.D.
New Jersey Bell Clifton Central Office Experiment, N.D.
Mechanized Approach to Inventory of Plug Ins, N.D.
General Bar Code Requirement, N.D.
Bar Code Scanners, N.D.
Bar Code Projects, November 1981-November 1982

Subgroup II, Series IV: Presentations-Series VII: Photographs/Slides, Box 67

Bar Code Project Meeting Minutes March 9, 1978, 1978-1982
Recommendation of Labeling and Scanning Committee, January 1977
Bars and Stripes Forever (Photo Included), N.D.
View Graph Originals (Original Order), N.D.
Master Labels, N.D.

Series V: Electronic Media, Box 67

ANSI TEST Data Files, N.D.
Intermec Lotus (2.01) Symbols 1,5,7,8, N.D.
Kodak Lotus Version 2.01 Symbols 1-5, N.D.
Kodak Lotus Version 2.01 Symbols 6-8, N.D.
ANSI Print Quality Software D504417 REUE, N.D.
Compliance Shipping Label Guide (3.5 inch floppy disk included), 1993

Series VI: Artifacts, Box 67

Resistors, October 14, 1994
Potlatch UPC Color Contrast Guide, 1974
Computype 3-in-1 Bar Code Calculator, 1980

Subgroup II, Series VII: Photographs/Slides, Box 67

Bar Code Test Photos Unidentified, N.D.
Code 39 Test Photos (15 items), N.D.
ISO/TC 122 Anaheim Meeting, 1995

Subgroup II, Series VII: Photographs/Slides, Box 68

Container 1

10 Cent Tag on Bee, 13 Slides
Scan Tech 92 Presentation, 40 Slides
New Requirements in Bar Coding, 13 Slides
Code Scanning in the City Bell System, 43 Slides

Container 2

Bar Code Scanning in the City Bell System Continued, 17 Slides
Pocono’s summer ’78, 1 Slide
Bar Coding at AT&T a Care Competency, 102 Slides
Shipping and Receiving Bar Code Label Specification, 20 Slides
Shipping and Receiving Bar Code Label Standard Issue 1, 9 Slides
Intermec Model 8132, 16 Slides

Container 3

Intermec Model 8132, 4 Slides
7.1.1-7.5.4.1.1.1, 16 Slides
Bar Code Technology, 47 Slides
Bar Code Scanning System Behind The Scanning, 9 Slides
Methods, Materials, Barcodes…, 13 Slides
ANSI MH10.8 1983, 11 Slides
TCIF Packaging and Labeling Subcommittee, 36 Slides

Container 4

TCIF Continued, 10 Slides
How Bar Codes are Being Used Today, 7 Slides
Role of Standards in Micrographic Systems, 58 Slides
Looking to the Future, 7 Slides
Miscellaneous People, Equipment, 50 Slides

Container 5A

Miscellaneous People, Equipment, 19 Slides

Container 5B

Miscellaneous People, Equipment, 18 Slides

Container 5C

Miscellaneous People, Equipment, 18 Slides

Container 5D

Miscellaneous People, Equipment, 12 Slides

Container 6

Envelope/Negative 1- Viewgraph Solid State Bar Code Scanner, N.D.
Envelope/Negative 2- Billie Coons Fedex Package, N.D.
Envelope/Negative 3-Scan Chek, N.D.
Envelope/Negative 4-Portable Scanner (Unidentified), N.D.
Envelope/Negative 5 (1 out of 2) – Telxon PTC 700, N.D.
Envelope/Negative 5 (2 out of 2)-Scope Scan, N.D.
Envelope/Negative 6- Data bank, N.D.
Envelope/Negative 7- Bar Coded egg, N.D.
Envelope/Negative 8 – Woman using handheld scanner, N.D.
Envelope/Negative 9- Pen wands, N.D.
Envelope/Negative 10-Unidentified equipment, N.D.
Envelope/Negative 11- Bar Code Check explanation, N.D.
Envelope/Negative 12- Magnetic Stripe Card, N.D.
Envelope/Negative 13- Pathmark Employee Terri Warm scanning items, N.D.
Envelope/Negative 14- Scanning chips in an aisle, N.D.
Envelope/Negative 15- Rt-7000, N.D.
Envelope/Negative 16- Bar Codes strips, N.D.
Envelope/Negative 17- Pin wheel bar code printer, N.D.
Envelope/Negative 18- Scanmark 700 field evaluation, N.D.
Envelope/Negative 19- Woman using pen wand to scan parts, N.D.
Envelope/Negative 20- Advances in operation Research cover, N.D.
Envelope/Negative 21- Military man scanning equipment, N.D.
Envelope/Negative 22- Unidentified over-the-shoulder portable scanner, N.D.
Envelope/Negative 23- CMI Control Module, N.D.
Envelope/Negative 24- Ruby wand w/ CMI Control Module, N.D.
Envelope/Negative 25- Circuit board w/bar code, N.D.
Envelope/Negative 26- Operation and Symbol placement of bar code on transport packages, N.D.
Envelope/Negative 27- LOGMARS final benefit cost summary, N.D.
Envelope/Negative 28- CMI Control Module w/Scope Bar Code System, N.D.
Envelope/Negative 29- Status of Bar code labeling plug-ins in the Bell System, N.D.
Envelope/Negative 30- CMI Control Module w/ case, N.D.
Envelope/Negative 31- Model PCP Portable Code Processor, N.D.
Envelope/Negative 32- CMI Control Module w/ battery charger (?), N.D.
Envelope/Negative 33- CMI Control Module w/ cassette case, N.D.
Envelope/Negative 35- Label Machine
Direct Thermal 1- Intermec Direct Thermal Paper, July 17, 1989-August 7, 1990
Direct Thermal 2- Intermec 8646 Paper Stock, May 10, 1990-August 7, 1990
Direct Thermal 3- Zebra 220 (IT), July 17, 1989-August 7, 1990
Direct Thermal 4- Additional Intermec 8646 Paper Stock, May 10, 1990-August 7, 1990
Direct Thermal 5-Additional Zebra 220 (IT), July 17, 1989-August 7, 1990